The machine is made by coupling modules of 4 seats into double sided groups from 32+32 to 40+40 seats. The coupling can be either in length or width. If you plan to apply a dryer, you should create a set of coupled machines in length. Additional mould pieces are twice as viable as a mould of the WC bottom is followed by a mould with the crown. For economy, the coupling length allows you to reuse the demoulder at multiple benches, conveniently staggered times casting. The moulds are closed by the machine vertically and horizontally by bracing.
The module consists of::
- Supporting bench mould tilted electrically
- Demoulder for pieces automatic type with electric motors and actuators driven by an inverter (LEM) allows the extraction and rotation of the mould
- Special sucker active for the posting of the bride and exact re positioning of the pieces just processed with the interposition of a special mixture gluing.
- Casting plant using PVC piping, valves and power distribution layer stainless steel tanks and accessories for use (taps, probes etc.).
- Empty plant with side channel blowers and adjustable pressure valve.
- Electric control panel, protection and control cycle casting.
Deposit Bench
Equipped with plans sliding wear and heat distribution pipes (on request).
Dryers (see overview)
The dryer is available upon request, can be mounted on the machine to make a daily double casting. Includes the distribution system under the deposit bench.
Permitted Uses
Casting of WC one piece type with integrated tank. Recommended elusively for American-style blocks. There is the need of dowels for undercuts.
Limits
Requires good manual dexterity and considerable skill in the adhesive deposition modelling must take into account the point of junction to maximize its invisibility. The form must take account of top heavy enough.